Build a Part Number

Build your Product

Please use the dropdowns below to build your product.

Select A Product Category

{{i+1}}. *

Specification Value
{{spec}} {{value}}
Specification Value
No Specs Returned, Please contact us for more details
Your Product
{{current_part.number}}
Part Number

Please complete all steps.

Review Part ✓

Blue Diamond HDPE Specifications

Fiber Optic and Power Conduit

{{current_part.number}} Conduit
Date 10262025
MATERIAL OD** ID** WALL
{{specSheetFields.size}} {{specSheetFields.material_wall}} SOLID WALL PE, COILABLE CONDUIT {{specSheetFields.od}} {{specSheetFields.id}} {{specSheetFields.wall}} MIN

 

**NOMINAL

 

SPECIFICATIONS
ASTM F2160: STANDARD SPECIFICATION FOR SOLID WALL HDPE CONDUIT BASED ON CONTROLLED OUTSIDE DIAMETER
ASTM D3350 (CELL CLASSIFICATION 334480C OR E): STANDARD SPECIFICATION FOR PE PLASTIC PIPE AND FITTINGS MATERIALS-RESINS EXCEEDING THE ABOVE CELL CLASS IN ONE OR MORE PROPERTIES IS ACCEPTABLE
Typical Properties

Property Test Procedures Units**
Density (3) ASTM D1505 0.940 - 0.947 gm/cc
Melt Index (3) ASTM D1238 <0.40 to 0.15 gm/10 min
Flexural Modulus (4) ASTM D790 80,000 – 110,000 psi

Tensile Strength (Yield) (4)
Environmental Stress

 ASTM D638 3000 - 3500 psi
Crack Resistance (ESCR) (8)** ASTM D1693 96 hrs
HDB @ 73.4oF (0)* ASTM D2837 ----
UV Stabilizer (C or E) ASTM D1603 1 year exposure
Ultimate Elongation ASTM D638 >400%
** F10>96 hours per ASTM F2160
* Not pressure rated - Consult ASTM D3350 for specific values
*** Consult ASTM Standards for acceptable tolerances.

4040 Finn Way, Suite 240
Lexington, KY, 40517
859.224.0415
859.224.0543 fax
www.bdiky.com

{{i+1}}. *

Specification Value
{{spec}} {{value}}
Specification Value
No Specs Returned, Please contact us for more details
Your Product
{{current_part.number}}
Part Number

Please complete all steps.

Review Part ✓

Blue Diamond HDPE Specifications

Fiber Optic Microduct

{{current_part.number}} Conduit
Date 10262025
MATERIAL OD** ID** WALL
{{specSheetFields.size}} {{specSheetFields.material_wall}} SOLID WALL PE, COILABLE CONDUIT, MICRODUCT -RIBBED INSIDE, {{specSheetFields.od}} {{specSheetFields.id}} {{specSheetFields.wall}} MIN

 

**NOMINAL

 

SPECIFICATIONS
ASTM F2160: STANDARD SPECIFICATION FOR SOLID WALL HDPE CONDUIT BASED ON CONTROLLED OUTSIDE DIAMETER
ASTM D3350 (CELL CLASSIFICATION 334480C OR E): STANDARD SPECIFICATION FOR PE PLASTIC PIPE AND FITTINGS MATERIALS-RESINS EXCEEDING THE ABOVE CELL CLASS IN ONE OR MORE PROPERTIES IS ACCEPTABLE
BELLCORE GR-356-CORE- (SECTION 4.2.5)- SILOXANE ADDITIVE IN COEXTRUDED INNER WALL FOR PERMANENT LOW COEFFICIENT OF FRICTION OF .10> PER BELLCORE SPEC
TESTING: SINGLE DUCTS ARE CONTINUOUSLY TESTED "IN PROCESS" WITH A METAL BALL AT 85% OF THE ID TO INSURE COMPLIANCE WITH THE SPECIFICATION
Typical Properties

Property Test Procedures Units**
Density (3) ASTM D1505 0.940 - 0.947 gm/cc
Melt Index (3) ASTM D1238 <0.40 to 0.15 gm/10 min
Flexural Modulus (4) ASTM D790 80,000 – 110,000 psi
Tensile Strength (Yield) (4) Environmental Stress ASTM D638 3000 - 3500 psi
Crack Resistance (ESCR) (8)** ASTM D1693 96 hrs**
HDB @ 73.4oF (0)* ASTM D2837 ----
UV Stabilizer (C or E) ASTM D1603 1 year exposure
Ultimate Elongation ASTM D638 >400%
** F10>96 hours per ASTM F2160
* Not pressure rated - Consult ASTM D3350 for specific values
*** Consult ASTM Standards for acceptable tolerances.

4040 Finn Way, Suite 240
Lexington, KY, 40517
859.224.0415
859.224.0543 fax
www.bdiky.com

{{i+1}}. *

Specification Value
{{spec}} {{value}}
Specification Value
No Specs Returned, Please contact us for more details
Your Product
{{current_part.number}}
Part Number

Please complete all steps.

Review Part ✓

Blue Diamond HDPE Specifications

Fiber Optic and Power Conduit

SuperGlide®

{{current_part.number}} Conduit
Date 10262025
MATERIAL OD** ID** WALL
{{specSheetFields.size}} {{specSheetFields.material_wall}} SOLID WALL PE, COILABLE CONDUIT {{specSheetFields.od}} {{specSheetFields.id}} {{specSheetFields.wall}} MIN

 

**NOMINAL

 

SPECIFICATIONS
ASTM F2160: STANDARD SPECIFICATION FOR SOLID WALL HDPE CONDUIT BASED ON CONTROLLED OUTSIDE DIAMETER. MEETS DIMENSIONAL REQUIREMENTS OF ASTM D3035.
ASTM D3350 (CELL CLASSIFICATION 334480C OR E): STANDARD SPECIFICATION FOR PE PLASTIC PIPE AND FITTINGS MATERIALS-RESINS EXCEEDING THE ABOVE CELL CLASS IN ONE OR MORE PROPERTIES IS ACCEPTABLE.
Bellcore GR-356-CORE - (SECTION 4.2.5): SUPERGLIDE® UHMW SILICONE/SILOXANE ADDITIVE FOR LOW COEFFIENT OF FRICTION of 0.10-0.15.
Typical Properties

Property Test Procedures Units**
Density (3) ASTM D1505 0.940 - 0.947 gm/cc
Melt Index (3) ASTM D1238 <0.40 to 0.15 gm/10 min
Flexural Modulus (4) ASTM D790 80,000 – 110,000 psi
Tensile Strength (Yield) (4) Environmental Stress ASTM D638 3000 - 3500 psi
Crack Resistance (ESCR) (8)** ASTM D1693 96 hrs
HDB @ 73.4oF (0)* ASTM D2837 ----
UV Stabilizer (C or E) ASTM D1603 1 year exposure
Ultimate Elongation ASTM D638 >400%
** F10>96 hours per ASTM F2160
* Not pressure rated - Consult ASTM D3350 for specific values
*** Consult ASTM Standards for acceptable tolerances.

4040 Finn Way, Suite 240
Lexington, KY, 40517
859.224.0415
859.224.0543 fax
www.bdiky.com

{{i+1}}. *

Specification Value
{{spec}} {{value}}
Specification Value
No Specs Returned, Please contact us for more details
Your Product
{{current_part.number}}
Part Number

Please complete all steps.

Review Part ✓

Blue Diamond HDPE Specifications

Fiber Optic Microduct

{{specSheetFields.way}}-Way Oversheathed

{{current_part.number}} Conduit
Date 10262025
MATERIAL OD** ID** WALL
{{specSheetFields.size}} {{specSheetFields.material_wall}} SOLID WALL PE, COILABLE CONDUIT {{specSheetFields.od}}  {{specSheetFields.id}} {{specSheetFields.wall}} MIN
  PACKAGE OD**   WALL
OVERSHEATH {{specSheetFields.way}}-WAY EXTRUDED OVER MICRODUCT AND TRACER WIRE PACKAGE {{specSheetFields.od}}   {{specSheetFields.wall}} IN

 

**NOMINAL

 

SPECIFICATIONS
ASTM F2160: STANDARD SPECIFICATION FOR SOLID WALL HDPE CONDUIT BASED ON CONTROLLED OUTSIDE DIAMETER
ASTM D3350 (CELL CLASSIFICATION 334480C OR E): STANDARD SPECIFICATION FOR PE PLASTIC PIPE AND FITTINGS MATERIALS-RESINS EXCEEDING THE ABOVE CELL CLASS IN ONE OR MORE PROPERTIES IS ACCEPTABLE
BELLCORE GR-356-CORE- (SECTION 4.2.5)- SILOXANE ADDITIVE IN COEXTRUDED INNER WALL FOR PERMANENT LOW COEFFICIENT OF FRICTION OF .10> PER BELLCORE SPEC
TESTING: SINGLE DUCTS ARE CONTINUOUSLY TESTED "IN PROCESS" WITH A METAL BALL AT 85% OF THE ID TO INSURE COMPLIANCE WITH THE SPECIFICATION
Typical Properties

Property Test Procedures Units**
Density (3) ASTM D1505 0.940 - 0.947 gm/cc
Melt Index (3) ASTM D1238 <0.40 to 0.15 gm/10 min
Flexural Modulus (4) ASTM D790 80,000 – 110,000 psi
Tensile Strength (Yield) (4) Environmental Stress ASTM D638 3000 - 3500 psi
Crack Resistance (ESCR) (8)** ASTM D1693 96 hrs**
HDB @ 73.4oF (0)* ASTM D2837 ----
UV Stabilizer (C or E) ASTM D1603 1 year exposure
Ultimate Elongation ASTM D638 >400%
** F10>96 hours per ASTM F2160
* Not pressure rated - Consult ASTM D3350 for specific values
*** Consult ASTM Standards for acceptable tolerances.

4040 Finn Way, Suite 240
Lexington, KY, 40517
859.224.0415
859.224.0543 fax
www.bdiky.com

{{i+1}}. *

Specification Value
{{spec}} {{value}}
Specification Value
No Specs Returned, Please contact us for more details
Your Product
{{current_part.number}}
Part Number

Please complete all steps.

Review Part ✓

Blue Diamond HDPE Specifications

Fiber Optic and Power Conduit

With Copper Tracer Wire

{{current_part.number}} Conduit
Date 10262025
MATERIAL OD** ID** WALL
{{specSheetFields.size}} {{specSheetFields.material_wall}} SOLID WALL PE, SDR XX, COILABLE CONDUIT W/ 18 GA. COPPER WIRE {{specSheetFields.od}} {{specSheetFields.id}} {{specSheetFields.wall}} MIN

 

**NOMINAL

 

SPECIFICATIONS
ASTM F2160: STANDARD SPECIFICATION FOR SOLID WALL HDPE PIPE BASED ON CONTROLLED OUTSIDE DIAMETER
ASTM D3350 (CELL CLASSIFICATION 334480C OR E): STANDARD SPECIFICATION FOR PE PLASTIC PIPE AND FITTINGS MATERIALS – RESINS EXCEEDING THE ABOVE CELL CLASS IN ONE OR MORE PROPERTIES IS ACCEPTABLE
Typical Properties

Property Test Procedures Units**
Density (3) ASTM D1505 0.940 - 0.947 gm/cc
Melt Index (3) ASTM D1238 <0.40 to 0.15 gm/10 min
Flexural Modulus (4) ASTM D790 80,000 – 110,000 psi
Tensile Strength (Yield) (4) Environmental Stress ASTM D638 3000 - 3500 psi
Crack Resistance (ESCR) (8)** ASTM D1693 96 hrs**
HDB @ 73.4oF (0)* ASTM D2837 ----
UV Stabilizer (C or E) ASTM D1603 1 year exposure
Ultimate Elongation ASTM D638 >400%
** F10>96 hours per ASTM F2160
* Not pressure rated - Consult ASTM D3350 for specific values
*** Consult ASTM Standards for acceptable tolerances.

4040 Finn Way, Suite 240
Lexington, KY, 40517
859.224.0415
859.224.0543 fax
www.bdiky.com

{{i+1}}. *

Specification Value
{{spec}} {{value}}
Specification Value
No Specs Returned, Please contact us for more details
Your Product
{{current_part.number}}
Part Number

Please complete all steps.

Review Part ✓

Blue Diamond HDPE Specifications

Fiber Optic and Power Conduit

ASTM F2160-SIDR Dimensions

{{current_part.number}} Conduit
Date 10262025
MATERIAL OD** ID** WALL
{{specSheetFields.size}} {{specSheetFields.material_wall}} SOLID WALL PE, COILABLE CONDUIT {{specSheetFields.od}} {{specSheetFields.id}} {{specSheetFields.wall}} MIN

 

**NOMINAL

 

SPECIFICATIONS
ASTM F2160: STANDARD SPECIFICATION FOR SOLID WALL HDPE CONDUIT BASED ON CONTROLLED OUTSIDE DIAMETER
ASTM D3350 (CELL CLASSIFICATION 334480C OR E): STANDARD SPECIFICATION FOR PE PLASTIC PIPE AND FITTINGS MATERIALS-RESINS EXCEEDING THE ABOVE CELL CLASS IN ONE OR MORE PROPERTIES IS ACCEPTABLE
Typical Properties

Property Test Procedures Units**
Density (3) ASTM D1505 0.940 - 0.947 gm/cc
Melt Index (3) ASTM D1238 <0.40 to 0.15 gm/10 min
Flexural Modulus (4) ASTM D790 80,000 – 110,000 psi
Tensile Strength (Yield) (4) Environmental Stress ASTM D638 3000 - 3500 psi
Crack Resistance (ESCR) (8)** ASTM D1693 96 hrs**
HDB @ 73.4oF (0)* ASTM D2837 ----
UV Stabilizer (C or E) ASTM D1603 1 year exposure
Ultimate Elongation ASTM D638 >400%
** F10>96 hours per ASTM F2160
* Not pressure rated - Consult ASTM D3350 for specific values
*** Consult ASTM Standards for acceptable tolerances.

4040 Finn Way, Suite 240
Lexington, KY, 40517
859.224.0415
859.224.0543 fax
www.bdiky.com

{{i+1}}. *

Specification Value
{{spec}} {{value}}
Specification Value
No Specs Returned, Please contact us for more details
Your Product
{{current_part.number}}
Part Number

Please complete all steps.

Review Part ✓

Blue Diamond HDPE Specifications

Fiber Optic and Power Conduit

UL 651 A Conduit

{{current_part.number}} Conduit
Date 10262025
MATERIAL OD** ID** WALL
{{specSheetFields.size}} {{specSheetFields.material_wall}} SOLID WALL PE, COILABLE CONDUIT {{specSheetFields.od}} {{specSheetFields.id}} {{specSheetFields.wall}} MIN

 

**NOMINAL

 

SPECIFICATIONS
UL 651 A: CONTINUOUS LENGTH HDPE CONDUIT. LISTING NUMBER 32RX. UL FILE NUMBER EAZX E251661
ASTM D3350 (CELL CLASSIFICATION 334480C OR E): STANDARD SPECIFICATION FOR PE PLASTIC PIPE AND FITTINGS MATERIALS
ASTM F2160: SOLID WALL HDPE CONDUIT BASED IN CONTROLLED OUTSIDE DIAMETER, ALSO MEETS NEMA TC 7 COILABLE CONDUIT SPECIFIFACTION
Typical Properties

Property Test Procedures Units**
Density (3) ASTM D1505 0.940 - 0.947 gm/cc
Melt Index (3) ASTM D1238 <0.40 to 0.15 gm/10 min
Flexural Modulus (5) ASTM D790 110,000 – 160,000 psi

Tensile Strength (Yield) (5)
Environmental Stress

 ASTM D638 3500 - 4000 psi
Crack Resistance (ESCR) (2)** ASTM D1693 96 hrs**
HDB @ 73.4oF (0)* ASTM D2837 ----
UV Stabilizer (C or E) ASTM D1603 >2%
Ultimate Elongation ASTM D638 >400%
** F-D failures
* Not pressure rated - Consult ASTM D3350 for specific values
*** Consult ASTM Standards for acceptable tolerances.

4040 Finn Way, Suite 240
Lexington, KY, 40517
859.224.0415
859.224.0543 fax
www.bdiky.com

{{i+1}}. *

Specification Value
{{spec}} {{value}}
Specification Value
No Specs Returned, Please contact us for more details
Your Product
{{current_part.number}}
Part Number

Please complete all steps.

Review Part ✓

Blue Diamond HDPE Specifications

Fiber Optic and Power Conduit

UL 651 A Conduit

{{current_part.number}} Conduit
Date 10262025
MATERIAL OD** ID** WALL
{{specSheetFields.size}} {{specSheetFields.material_wall}} SOLID WALL PE, COILABLE CONDUIT {{specSheetFields.od}} {{specSheetFields.id}} {{specSheetFields.wall}} MIN

 

**NOMINAL

 

SPECIFICATIONS
UL 651 A: CONTINUOUS LENGTH HDPE CONDUIT. LISTING NUMBER 32RX. UL FILE NUMBER EAZX E251661
ASTM D3350 (CELL CLASSIFICATION 334480C OR E): STANDARD SPECIFICATION FOR PE PLASTIC PIPE AND FITTINGS MATERIALS
ASTM F2160: SOLID WALL HDPE CONDUIT BASED IN CONTROLLED OUTSIDE DIAMETER, ALSO MEETS NEMA TC 7 COILABLE CONDUIT SPECIFIFACTION
Typical Properties

Property Test Procedures Units**
Density (3) ASTM D1505 0.940 - 0.947 gm/cc
Melt Index (3) ASTM D1238 <0.40 to 0.15 gm/10 min
Flexural Modulus (5) ASTM D790 110,000 – 160,000 psi

Tensile Strength (Yield) (5)
Environmental Stress

 ASTM D638 3500 - 4000 psi
Crack Resistance (ESCR) (2)** ASTM D1693 96 hrs**
HDB @ 73.4oF (0)* ASTM D2837 ----
UV Stabilizer (C or E) ASTM D1603 >2%
Ultimate Elongation ASTM D638 >400%
** F-D failures
* Not pressure rated - Consult ASTM D3350 for specific values
*** Consult ASTM Standards for acceptable tolerances.

4040 Finn Way, Suite 240
Lexington, KY, 40517
859.224.0415
859.224.0543 fax
www.bdiky.com

{{i+1}}. *

Specification Value
{{spec}} {{value}}
Specification Value
No Specs Returned, Please contact us for more details
Your Product
{{current_part.number}}
Part Number

Please complete all steps.

Review Part ✓

Blue Diamond HDPE Specifications

Fiber Optic and Power Conduit

Ribbed Wall Duct

{{current_part.number}} Conduit
Date 10262025
MATERIAL OD** ID** WALL
{{specSheetFields.size}} {{specSheetFields.material_wall}} SOLID WALL PE, COILABLE CONDUIT, RIBBED INSIDE {{specSheetFields.od}} {{specSheetFields.id}} {{specSheetFields.wall}} MIN

 

**NOMINAL

 

SPECIFICATIONS
ASTM F2160: STANDARD SPECIFICATION FOR SOLID WALL HDPE CONDUIT BASED ON CONTROLLED OUTSIDE DIAMETER
ASTM D3350 (CELL CLASSIFICATION 334480C OR E): STANDARD SPECIFICATION FOR PE PLASTIC PIPE AND FITTINGS MATERIALS-RESINS EXCEEDING THE ABOVE CELL CLASS IN ONE OR MORE PROPERTIES IS ACCEPTABLE
Typical Properties

Property Test Procedures Units**
Density (3) ASTM D1505 0.940 - 0.947 gm/cc
Melt Index (3) ASTM D1238 <0.40 to 0.15 gm/10 min
Flexural Modulus (4) ASTM D790 80,000 – 110,000 psi
Tensile Strength (Yield) (4) Environmental Stress ASTM D638 3000 - 3500 psi
Crack Resistance (ESCR) (8)** ASTM D1693 96 hrs**
HDB @ 73.4oF (0)* ASTM D2837 ----
UV Stabilizer (C or E) ASTM D1603 1 year exposure
Ultimate Elongation ASTM D638 >400%
** F10>96 hours per ASTM F2160
* Not pressure rated - Consult ASTM D3350 for specific values
*** Consult ASTM Standards for acceptable tolerances.

4040 Finn Way, Suite 240
Lexington, KY, 40517
859.224.0415
859.224.0543 fax
www.bdiky.com

FAQs

What does SDR stand for?

SDR is the Standard Dimension Ratio.  Technically, it is the nominal outside diameter divided by the minimum wall thickness.  The larger the SDR the thinner the wall thickness.  See our tables for standard SDR numbers.

Build a Part Number